EditWYSIWYGAttachPrintable
r10 - 01 May 2010 - 01:27:10 - TomParkerYou are here: carrott.org >  ElectricMini Web > Brakes

Master Cylinder

I am converting from vacuum servo to manual brakes. I considered an after market racing master cylinder but settled on a new dual circuit master cylinder from Mini Spares. Minimania has the fitting instructions online.

New Pipes:

top/front 380mm
bottom/back 280mm

Brake Pedal

I got a non-assisted brake pedal to go with the manual master cylinder (the vacuum servo has a different brake pedal).

Regen

regen-sensor.jpg
Enlarge
Race Technology Pedal Position Sensor
pedals.jpg
Enlarge
Pedal Position Sensor installed
I have one of these http://www.race-technology.com/pedal_position_13mm_travel_2_60.html.
Edit | WYSIWYG | Attach | Printable | Raw View | Backlinks: Web, All Webs | History: r10 < r9 < r8 < r7 < r6 | More topic actions
 
Powered by carrott.org
This site is powered by the TWiki collaboration platformCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding carrott.org? Send feedback