Driveshafts

From CarrottElectric
Jump to: navigation, search

The mini driveshafts + differential width is 400+470+215=1085mm

I will have the mitsubishi shafts cut down to the same total length

driveshafts-complete.jpg

wire length wire into inner joint shaft into inner joint clearence shaft length to outer face
386 75 68.5 20 379.5
482 71 68.5 20 479.5
differential joint joint toInner total width
132 87 87 22 1072

The driveshafts were cut too short. With the left hand shaft at full drop (without drop stop) close to the bump stop

bump drop
left 3mm 21mm
right 7mm

It would appear that the ball can go in 30mm from the face.

Personal tools